Analog-devices SHARC 82-000805-01 Manual de usuario descargar pdf (Pagina 18)

Breadboard Area

1-2 SHARC EZ-Extender Manual

Switch (SW1)” on page 2-3. The setup of the general-purpose signals

DAI_P15_GP1 and DAI_P16_GP2 is dependent on the specific ADC HSC

evaluation board being interfaced; therefore, the board’s model must be

taken into consideration.

The data bus of the EZ-Extender must be enabled before data is read.

Enable the data bus by a memory read from address 0x160 0000, which

the AD[15:0] pins set up as the external port. Then, the AD[15:0] pins can

be set up in PDAP mode.

A list of ADC boards compatible with the extender can be found at

http://www.analog.com/processors/processors/blackfin/technicalL-

ibrary/manuals/pdf/EZ-Extender_to_DSP_Supported.pdf. Contact

Technical Support for information about available examples. To learn

more about Analog Devices data converters, go to www.analog.com.

Breadboard Area

SHARC EZ-Extender broadens the range of the EZ-KIT Lite applications

by providing surface mounted (SMT) footprints for breadboard capabili-

ties and access to all of the pins on the EZ-KIT Lite’s expansion interface.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 34 35

Sin comentarios

Analog-devices SHARC 82-000805-01 Manual de usuario Pagina 18